Decal Install Guide: Dry Install of Medium-Sized Graphics
Supplies Needed
|
Squeegee (Supplied free with every order)
Application Fluid in Spray Bottle (Mixture of 1 teaspoon of liquid soap in 1 litre of water)
Kitchen paper towel
|
|
Each Decal Consists Of 3 Layers
|
Top layer (application tape)
Middle layer (decal)
Bottom layer (backing wax paper)
|
|
1) Clean application surface thoroughly with application fluid.
NOTE:NEVER USE AMMONIA BASED CLEANERS (i.e. Windex). It will out gas for a couple of weeks and create bubbles under the decal. Which will result in accidental decal peeling.
|
|
|
2)WITHOUT PULLING OFF THE BACKING PAPER, Apply masking tape along the top of your decal and place on the surface area creating a hinge.
|
|
|
3) Flip Decal up and pull backing paper off half way only and fold against back of decal.
|
|
|
4) Bring decal down and still holding on to the folded part, gently squeegee the decal onto the window until the half of the total area has been installed on the window.
|
|
|
5) Now peel the rest of the backing paper off and carefully squeegee the decal onto the window.
|
|
6) Your decal will now be secured onto your surface area.
|
|
7) Finally, gently remove application tape by pulling straight back, leaving the decal on the surface.
|
You are now ready to sport your new decal!
| Decal Type/Size |
Dry Application |
Wet Application |
| Windshield Decals |
View
|
View
|
| Medium Sized Decals |
View
|
View
|
| Hood Decals/Large Decals |
Use wet method |
View
|
| Body/Accent Decal Kits |
Use wet method |
View
|
| Sun Visor Decals/Strip |
Use wet method |
View
|
| BackScapes Install |
View
|
Use dry method |
Please Note: Both Dry or Wet applications will give you the same results. You can choose to apply your decals via Wet or Dry methods. Due to their size we suggest a Wet application for Hood/Large and Body Decals.
|
|
|
